| Customization: | Available |
|---|---|
| Application: | Industrial |
| Speed: | Low Speed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Replaceable Orbital Motors Cross Reference Table
| FYSCI-HONGDA GROUP |
DANFOSS | M+S | EATON | ROSS | WHITE | PARKER | SAM | BOSCH |
| HYDRAULIC | CHAR LYNN | TRW | CROSS | BREVINI | REXROTH | |||
| BM1/BMP | OMP DH | MP HP | H SERIES | MF MG | WP RS | TC TE TB | BG | MGP GXP |
Main Specification1. Continuous pressure:Max.value of operating motor continuously.
2.Intermittent pressure:Max.value of operating motor in 6 seconds per minute .
3.Peak pressure:Max.value of operating motor in 0.6 second per minute.
4.The optimum operating situation should be at the 1/3-2/3 of the continuous operating situation.
Replace DANFOSS No.
| 151-0300 | 151-0313 | 151-0607 | 151-0631 | 151-5194 | 151-5217 |
| 151-0301 | 151-0314 | 151-0608 | 151-0632 | 151-5195 | 151-5218 |
| 151-0302 | 151-0315 | 151-0610 | 151-0633 | 151-5196 | 151-5219 |
| 151-0303 | 151-0316 | 151-0611 | 151-0634 | 151-5197 | 151-5221 |
| 151-0304 | 151-0317 | 151-0612 | 151-0635 | 151-5198 | 151-5222 |
Replace EATON/CHAR-LYNN
| 101-1001 | 101-1023 | 101-1045 | 101-1067 | 101-1089 | 101-1352 | 101-1758 |
| 101-1002 | 101-1024 | 101-1046 | 101-1068 | 101-1090 | 101-1449 | 101-1759 |
| 101-1003 | 101-1025 | 101-1047 | 101-1069 | 101-1091 | 101-1459 | 101-1762 |
| 101-1004 | 101-1026 | 101-1048 | 101-1070 | 101-1092 | 101-1463 | 101-1765 |
| 101-1005 | 101-1027 | 101-1049 | 101-1071 | 101-1093 | 101-1466 | 101-1766 |
Replace M+S HYDRAULIC
| MP50 | MP80 | MP100 | MP125 | MP160 | MP200 | MP250 | MP315 | MP400 |
| MLHP50 | MLHP80 | MLHP100 | MLHP25 | MLHP60 | MLHP200 | MLHP250 | MLHP315 | MLHP400 |
UsageGuide
1.BM Series motors are designed as low speed high torque and low weight type motors.
2.A simultaneous max,speed and max.pressure is not recommended.
3.Can be used in parallel or in series.Case drain line is necessary when back pressure is over 5 Mpa.
4.The optimum operating situation should be at the 1/3-2/3 of the continuous operating situation.
5.Make sure the motor is always filled with oil before operating.
6.Max.operating temperature:80ºC.
7.Recommended fluid:Anti-wear type of hydraulic oil.Viscosity recommended 37-73cst.Filtration:ISO19/16
We are a premier manufacturer of Hydraulic & Pneumatic equipment, with over 25 years of experience in crafting customized cylinders and systems for clients across diverse industries, including:
As an authorized supplier for numerous Chinese state-owned corporations, we pride ourselves on delivering unparalleled quality. While our products may not always be the cheapest option on the market, our commitment to quality is unmatched!
Product Specifications:
| Product Name | Gear Pump / piston pump / Vane Pump / Motor |
| Standard Nonstandard | Standard |
| Operation Temperature | -20°~50° |
| Material | Cast Iron, C45 Steel, Stainless Steel, Aluminum |
| Max pressurer | 0~450 bar |
| Max speed | 0 ~ 4000 rpm |
| Brand | Rexroth /Parker/ Eaton/ Kawasaki/ Danfoss/ Yuken /Vickers/ Hydac / Atos /Bucher/Huade/Hawe |
| Customized support | OEM, ODM, OBM |
| Application | Automotive Industry, Industrial Utilities, Machining, Metal and Equipment ,Manufacturers, Mining industry |
| Certification | ISO 9001/ CE / ISO9000 /ISO14001/ISO45001 |
We have a wide range of advanced manufacturing equipment, including
We maintain strict supplier control:
1. All suppliers have to provide quality certificate
2. All materials must have test / source reports
3. Only use genuine seals, e.g., Parker, Merkel, Hallite
1 We have a professional quality control department, every step from raw materials to finished products is in the same factory, and every procedure will be tested by professional inspectors.
2 Each spare part will be measured and cleaned prior to assembly of the hydraulic cylinder. After the hydraulic cylinder is assembled, the pressure test will be carried out one by one. During the nearly one-hour test, we ensured that the test pressure was 30%-50% higher than the rated pressure. Each hydraulic cylinder must be tested without any leakage.
Packing and Shipping
Minimum order quantity: 1PC
Packing: Just in case
Terms of delivery: 1. by sea; 2. Air transport; 3. Express to the door,
Payment method: D/P L/C D/A T/T
A: We are Hydraulic & Pneumatic equipment manufacturer based in Wuhan, China. We've been in the industry since 1999, and we've gained the export certification, which means we could export with lower cost. You are more than welcome to visit our factory. You can find more information at our website.
Q: 2. Do you accept OEM? What is your minimum order quantity? Do you have OEM experience?
A: We accept OEM for every product that we produce, there is no MOQ for any of our product if you wanted a OEM, We've been doing OEM ever since the year we established our factory, which is 1999. We have a mature technical team ready to discuss your unique requirements with you.
Q: 3.ls your delivery always on time?
A: We can't promise about the freight but what we can do is shortening our lead time while keep the same quality level. Therefore, it will not be any problem even if the sea freight delay for a couple days.
Q: 4. Why don't you have CE certification?
A: CE certification is for one product, not the whole factory, and we have way too many product lines to registered CE for, but our customers from Europe said it's easy to solve the CE problem. And we are working on the CE certifications registration process, in order to save our customers' time in the future. By the way, there are many products with fake CE Certification on the market, please be aware with that to avoid unnecessary problems.
Q: 5. How do l start to order?
A: First, talk to our sales about your machine model, working conditions, technical requirements, deadlines. Then, our sales will provide the details you need. All inquiry will be responded within 24 Hours.
Q: 6. Can you tell me the latest situation of order production process?
A: Of course, unlike others who might hide their production process, our production process is totally open for our customers. Feel free to inform our sales about your needs.
){kind=link}